In development
In development
Slovamid is a trade mark for an engineering plastic material on the base of polyamide 6 and polyamide 6.6. PROPERTIES OF SLOVAMIDS: The SLOVAMIDS as engineering thermoplastics offer a combination of properties, including high strength (especially at elevated temperatures), toughness at low temperatures, stiffness, wear and abrasion resistance, low coefficient of friction, and good chemical resistance. They are suitable for the manufacture of parts for electrotechnical industry and elements, which an increased mechanical strength and heat resistance as well require. It is distinquished by very good dielectric properties. It is intended for processing by injection molding.
The basic type. It is suitable for the manufacture of parts electrotechnical industry, automotive applications, consumer applications. Approval certificate EVPÚ, a.s. State testing shop SKTC 101 Nová Dubnica for using in electrical applications available.
The type reinforced with 10% chopped glass. It si suitable for technical parts requiring higher strength and stiffness.
The type reinforced with 15% chopped glass. It si suitable for technical parts with increased requirement of strength and stiffness.
The type reinforced with 20% chopped glass. It is intended for mechanically highly stressed parts. It provides good tensile and impact strength, dimensional stability at high temperatures and good dielectric properties
The type reinforced with 25% chopped glass. It is intended for mechanically highly stressed parts. It provides good tensile and impact strength, dimensional stability at high temperatures and good dielectric properties.
The type reinforced with 30% chopped glass. It is intended for mechanically highly stressed parts. It provides excellent tensile and impact strength, dimensional stability at high temperatures and good dielectric properties. Approval certificate EVPÚ, a.s. State testing shop SKTC 101 Nová Dubnica for using in electrical applications available.
The type reinforced with 20% chopped glass. It is intended for mechanically highly stressed parts. It provides an excellnet tensile and impact strength, dimensional stability at high temperatures and good dielectric properties.
The type reinforced with 50% chopped glass. It provides very high stiffness and the dimensional stability.
The type reinforced with 60% chopped glass.
The type reinforced with 15% chopped glass and 25% of talc.
The type reinforced with 15% chopped glass and stabilized against heat aging.
The type reinforced with 30% chopped glass and stabilized to heat aging.
The type reinforced with 35% chopped glass and stabilized against heat aging.
The type reinforced with 5% chopped glass, flame retarded.
The type reinforced with 15% chopped glass, flame retarded. It is intended for applications where a good strength and flame retardant is required. It is classified as UL94 V-0
The type reinforced with 20% chopped glass, flame retarded.
The type reinforced with 20% chopped glass, flame retarded.
The type with 25% chopped glass and with contant of flame retardant. Excellent mechanical and electrical properties and improve flame retardance. It is intended for applications where an extreme strength and flame retardant is required. It is classified as UL94 V-0. Approval certificate EVPÚ, a.s. State testing shop SKTC 101 Nová Dubnica for using in electrical applications available.
The type reinforced with 10% chopped glass, flame retarded. It provides a lower inflammability and good dimensional stability at high tempetarures.
The type reinforced with 10% chopped glass, flame retarded.
The type with content of 5% of crystallic graphite which improves a slippery properties.
The type with content of 10% of crystallic graphite. It has very high slippery properties and a good stiffness.
The type with flame retardant. It is suitable for the manufacture of electrical parts. It is classified as UL94 V-0. Approval certificate EVPÚ, a.s. State testing shop SKTC 101 Nová Dubnica for using in electrical applications available.
The type with flame retardant. It is suitable for the manufacture of electrical parts. It is classified as UL94 V-0. Approval certificate EVPÚ, a.s. State testing shop SKTC 101 Nová Dubnica for using in electrical applications available.
Highly tough material. It is intended for highly stressed parts in a dry enviroment or by low temperatures.
The type with content of 30% of talc. It provides a good isotropy of shrinkage, dimesional stability at high temperatures and lover shrinkage.
The type with a microcrystallic structure which avoids an unisotropy of mechanical properties. It is optically broaded and it has a high gloss.
The type with content of 20% of glass beads. It provides a good isotropy of mechanical properties, shrinkage and high quality surface.
Slovamid is a trade mark for an engineering plastic material on the base of polyamide 6 and polyamide 6.6. PROPERTIES OF SLOVAMIDS: The SLOVAMIDS as engineering thermoplastics offer a combination of properties, including high strength (especially at elevated temperatures), toughness at low temperatures, stiffness, wear and abrasion resistance, low coefficient of friction, and good chemical resistance. They are suitable for the manufacture of parts for electrotechnical industry and elements, which an increased mechanical strength and heat resistance as well require. It is distinquished by very good dielectric properties. It is intended for processing by injection molding.
The basic type. It is suitable for the manufacture of parts electrotechnical industry, automotive applications, consumer applications. It offers high temperature resistance and stiffness.
The type reinforced with 15% chopped glass. It provides a high strength and stiffness.
The type reinforced with 30% chopped glass. It is intended for mechanically highly stressed parts. It provides excellent tensile and impact strength, dimensional stability at high temperatures and good dielectric properties.
The type reinforced with 30% chopped glass and stabilized against heat aging.
The type reinforced with 20% of chopped glass and with 10% of glass balls. It provides good isotropy of shrinkage nad good appearence.
The type reinforced with 35% chopped glass and with contant of flame retardant. It provides a high strength and stiffness.
The type reinforced with 25% chopped glass with flame retardant on the base red phosphorus. It provides excellent tensile and impact strength, elektrical properties as well as decreased flammability.
Is a semicrystaline thermoplastic polyester designed especially for injection molding. It offers good mechanical properties, high temperature resistance, good chemical resistance, good electrical properties and excelent melt flow properties. It is suitable especially for technical parts for automotive and electrotechnical industry.
The type reinforced with 10% chopped glass.
The type reinforced with 20% chopped glass. It provides a high strength and stiffness.
The type reinforced with 30% chopped glass. It provides a high strength, stiffness and modulus of elasticity.
Slovalen is a trade mark for modified material on the base of polypropylene. PROPERTIES OF SLOVALENS: SLOVALEN as an engineering thermoplast offers compared to non-filled polypropylene higher stiffness, increased shape stability at elevated temperatures and lower shrinkage. It is suitable for manufacturing of parts for engineering, building industries, electrotechnical industry and consumer applications. It is intended for processing by injection molding.
Homopolymer PP with 20% chopped glass and a modifier of mechanical properties. It offers good tensile and impact strength. It is suiable for molding with higher stiffness.
Homopolymer PP reinforced with 25% chopped glass and a modifier of mechanical properties. It offers a high strength, striffness, stability at higher temperatures and a lower shrinkage by holding a good thoughness.
Homopolymer PP with 30% chopped glass and modifier of mechanical properties. It offers high strength, stiffness, the shape stability at elevated temperatures and lower shrinkage by holding of good thougness.
Homopolymer PP with 30% chopped glass. It provides higher tensile and impact strength.
Copolymer PP filled with 40% calcium carbonate. It provides good impact strength.
Modified copolymer PP with UV stabilizer.
Modified copolymer PP with flame retardant and UV stabilizer.
Homopolymer PP filled with 40% calcium carbonate. It provides good impact strength.
Homopolymer PP with 20% talc. It provides good impact strength and stiffness.
Homopolymer PP with 40% talc. It is suitable for molding with higher stiffness.
Homopolymer PP modiefied with thermoplastic elastomer. It provides a high toughness.
Homopolymer with 20% of chopped glass.
Homopolymer with 10% of chopped glass.
Homopolymer with content of flame retardant.
Homopolymer with 30% of chopped glass.
Initiator of anion polymeryzation
Sodium dicaprolactamato-bis(2-methoxyethoxo) aluminate of the formula NaAl [N(CH2)5CO] 2 (OCH2CH2OCH3)2 has proved excelent results like an initiator of anionic polymerization and copolymerization of lactams. One of its main advantages compared to the other types of initiators is its substantialy lower sensitivity to moisture and purity of used Caprolactame.
Dilactamate getting ready for oversea transport
